Jump Pack Thrusters - Light em up!

No longer must your jump packs be extinguished! light em up! Here is a step by step of how I make mine (shamelessly copy&pasted from my BnC post..)

I use P3 red ink, and Vallejo sun yellow and white.

I start with basic black primed or dark dry-brushed jump pack thrusters. I work on them in sets so I can maximize painting while others dry.



I start with a big blob of white in the two source parts of each thruster. I often have a huge crack there, so I will add thick white layers over the course of painting to fill it up. These will be my light source. I then take thinned whites and edge all the hard corners and lines that would face these white light sources. This needs a brush with a well kept point, but uses the paint on the edge of the brush. If you are not used to this method, take some scrap minis to try it on. Having the right amount of thinned paint on the brush will help immensely, so I usually wipe the first stroke on my thumbnail (subsequently I often end a paint session with a Jackson Pollock on my thumb)



Next I do the same thing with a thinned Sunburst Yellow, leaving white at the source dots. Well thinned paint helps again. Too watery and it will run into crevices, and too dry and you will be dry-brushing a yellow that isn't as striking.



I cover everything in a thin layer of red ink, leave the white sources if you can, otherwise touch it up at the end. This gives everything a good heated area look.



I go back over some of the edges with yellow again.



I decided the red wasn't heavy enough, so I apply another red ink layer to certain spots away from the edges and touch up the white sources.



There you go! This is a good way to get used to simple source lighting. You can see that my powerfist/thunderhammers follow a similar lighting feel. My other power weapons follow a slightly different style, relying more on lava texture and gradient.

______________________________________________